Bucket trucks are undoubtedly a major asset in many industries: utilities, cable, forestry, exterior construction work including painting and window washing; and of course the fire departments. When purchasing one of these vehicles, as important as it is to identify the right model for your business, it’s equally important to know how easily you can purchase bucket truck parts and accessories when you need them.
What are the normal parts you might want to replace? What accessories can you add to improve your employees’ work environment? This is essential information to know even as you research the right make and model for your purchase, especially if economics have you considering a used version versus a new version of your desired vehicle.
Below is a list of parts and accessories that you can review and determine how quickly you can afford them before making a purchase decision.
The bucket and relevant accessories:
pail – Obviously this is the most important part of the vehicle and can be replaced quite easily. They can be replaced by the original manufacturer or many other manufacturers available. There are several layouts available, as well as several other options, including whether you need a size for one or two people, where the controls mount, specific step information to include location in or out, which side, and the number of steps.
Transatlantic- One of the main accessories that you must have is a polyethylene liner, as these liners are well known to save lives. Original equipment fiberglass buckets generally do not have full dielectric protection. Liners are like a lineman’s rubber gloves; They provide a barrier to the passage of electrical current through the body. It is a plastic product that fits inside the bucket to protect it from damage and improve worker safety. These coatings must be tested annually to ensure they still retain their ability to be used for safety prevention.
cover – If your company does not have a garage for trucks, the bucket must be protected from inclement weather. A cover is needed to protect it and it is usually mounted using straps with buckles that fit under the rim or lip. These covers are usually made of vinyl or fiberglass.
Guard- Similar to liner, this is a cover for various parts including controls, winches, boom tips, pulleys, brakes, hoses, collars, extensions, and knuckles. It is a barrier or guard that is placed to protect against the contact of phases of live lines with any part of your body or indirectly through conductive materials, tools or equipment.
The Arm or Boom:
The boom or arm is one of the main parts of the bucket truck that must be properly maintained to a high quality safety standard. Unfortunately, anything less than this could result in worker accidents when put into operation. Before use, each of these should be thoroughly examined by a competent person to assess the condition of this device.
Arm replacements are readily available from the original manufacturer and/or other commercial vendors who offer replacements for inserts that meet the manufacturer’s standards. A replacement may be made of steel like most original arms; the steel version can be replaced with a fiberglass version that is dielectric and structurally sound.
Since the arms are such an important part and can be very expensive to replace, a thorough inspection should be done by an expert in the field and can usually offer a recommendation on whether to repair or replace. It is always best to follow the inspector’s recommendation to avoid future problems or accidents. Production records and a permanent serial number must be available for each bar.
Various accessories:
non-slip surface – This is a dielectrically strong anti-slip material that can be adhered directly to the liner floor and eliminates the need for a traditional scuff pad. The purpose is to eliminate slippage on the floor of the coating.
ergonomic mat – A pail floor mat that provides two-thirds of the surface air; It is non-conductive and temperature resistant. It reduces slippage, keeps the worker’s feet above water when working in the rain, and acts as insulation for the worker’s feet when working in cold temperatures.
ergonomic support – Hangs from the top of the bucket or liner and allows the worker’s thighs to rest against it and brace the body when the worker needs to lean against the edge and pry the job, otherwise creating serious injury. back strain. With this device, the inherent tensile stress is transferred from the back to the legs.
tool board or table – It is a plate that is mounted inside the bucket or liner to hold tools and/or supplies; it can also provide a stand for a laptop.
Bucket truck parts come in many shapes and sizes, just like the trucks they came from. They are also manufactured by many different companies to improve the working environment of these high-rise work vehicles. By doing your research ahead of time, you’ll know you’re making the right buying decisions.
Recent Comments