When designing a piece of jewelry for an individual, many things must be considered. First, the person you are designing for, second, shapes, styles, and colors for that particular type of design, including all the necessary requirements and constraints for the piece to be comfortable and functional. If these aspects are taken into account, your client will have a piece of jewelry that will suit an individual’s personality and way of life and will be more suitable for their appearance. In this way, the client will increase jewelry that can become an integral part of his wardrobe and remain a prized possession for many years and perhaps many generations. The first and most important thing to remember is:

layout preferences
The first important point is that the person we are designing for is a man or a woman. Knowing this would make the job easier and a designer can design the part accordingly. We also need to care about the age factor i.e. children, young and old during design. Other than this, we should focus on the variety of jewelry to be built i.e. rings, earrings, pendants, brooches, necklaces, etc. This is the most important point to remember during the design of any jewelry because its absence could cause a complete mess in the subsequent design.

If we have decided this, then numerous variations must be taken care of, that is, it must be a real or fantasy jewelry.

Theme and occasion:
After deciding on the type of jewelry, a designer must identify the client’s interest in the design. At some point, the client orders all the designs on a particular theme, for example, love, music, ocean, etc.

Therefore, we must design on those issues keeping the latest trend in concern. Along with this, the occasion that the client will wear it is very important, it can be Engagement, Wedding, Birthday, Anniversary, Valentine’s Day, Deepawali, Id, Christmas, official meeting etc.

Jewelry Piece Size:
Some pieces of jewelry needed a certain size to wear, ie rings, bangles, bracelets, necklaces, etc. The ring size can be from 5 to 13 us (15.7 to 22.2 mm). Wear a well-fitting ring to determine your ring size. Place your ring on the closest size circle. The inside edge of the ring should line up with the outside edge of the circle, so if your ring seems to fit between two sizes, buy the larger size. Women’s standard necklace sizes can be 16″ Choker length, 17-18″ Will reach clavicle and bead chain: 30″ below the chest and for men’s standard chain sizes can be 18″ Base of Neck: For smaller neck sizes, 20″ to clavicle – Most common length for the average size male, 22 to 24 inches, a few inches below the clavicle. Similar to ring and necklace, bracelet should be designed according to a particular size. 8½” Average wrist for man or woman with larger wrist & 9″ For man with larger wrist. So keep in mind the size factor as well. Design would be very fitting.

Metal:
It is important to sketch out the design before turning it into an actual piece of jewelry, so the designer must show the representation of metal in their design. What is the appropriate metal, i.e. gold, silver, platinum, alloy, brass, or other substance?

Jewelry is made of almost all known materials. While high-quality, aesthetic pieces are made from precious metals, less expensive costume jewelry is made from less valuable materials and is manufactured.

If the customer wants to buy gold jewelry, the first thing to consider is the word karat. The carat is the unit used to represent the proportion of gold in the piece of jewelry. Pure gold is set to 24 karat, but there is no 24 karat gold jewelry because pure gold is too flexible to be made into any form of jewelry.

Diamond jewelry is popular in 18K (75% gold), 16K (66.67% gold), 14K (about 58% gold), and 12K (50% gold). And the purity of silver jewelry is 92.5. One metal in particular that has gained quite a bit of popularity in the last ten years is platinum. Platinum is used to make all different types of jewelry items.

Learn how and why this process occurs and how different metals create different shades of color.

Metallic decoration:
Metal decorations enhance the beauty of jewelry. So, after deciding, the metal designer should work on metal decoration, i.e. enamelling, filigree, or metal textures or finishes. Whether matte, Florentine or satin finish, many types of finishes can be used. Hammered textures are in recent trend.

It is important to decide on the polish and plating of the jewelry before making it. Whether the piece of jewelry looks elegant in rhodium or in an antique look.

If vacuum electroplating is carried out on nickel or brass with a similar color to the metal on the surface of the metal, such as golden yellow to look like gold, or light gray to look like platinum, etc.

Through the above steps, the statement can have the effect of a jewel-encrusted metal, and the production quality and value are greatly improved.

Choice of gemstones:
Jewelry is a wonderful accessory that can be styled in a wide range of precious metals and stones. These gemstones can be used with different sizes, colors, and varieties. Diamond is the most beautiful gem material that makes up your jewelry design.

When using diamonds and other colored gemstones in jewelry, there are four things to keep in mind. These are the cut, color, carat, and clarity of the diamond. Of these four aspects, the most important is the carat of the diamond. As the weight and size increased, the price increased a lot. The facets of the gemstone must be balanced and this is called symmetry. And finally, the cuts must be made along specific lines to avoid chipping on the surface. Gemstones must be clear. There is no inclusion about him.

Otherwise, it will decrease its price. Jewelry lasts for many years, so try to use good quality gemstones, whether precious or semi-precious.

However, appearances can be deceiving, but if you are not smart enough to choose good quality gemstones, you could end up with poor quality gemstones. The gemstones depend on the customer’s choice or the look of the jewelry. At some point they choose it or like to wear it according to their planetary position.
colored stones

Gemstone setting:
After choosing the gemstones to train with, it is very important to know what type of setting would be used. The sons secure themselves in their settings by first cutting out a seat in which the stone remains, and then covering the stone from above with some additional metal. This traps the stone so it cannot move up or down. There are several options for how to secure a stone in a mount. The most common settings are Spike Settings, Grain Settings, other styles are Rub Over, Pave, Channel, Illusion, Star Settings, Invisible Settings, Suspension Settings, and Countersunk.

The Prong setting is the most prevalent method of setting gems and diamonds, there are a variety of other methods that are also used to set gems in precious metals. Therefore, stone setting is an important feature of jewelry design and manufacturing.

Link, clip and clasp:
When the design comes to jewelry making, it will be easy to make if we show the right links, clips and clasps in our design. Should the designer use them as an integral part of jewelry making? Many designers have done just that to great effect. Take a look at the jewelry designs, whether or not links, clips, or clasps were used. As clips or clasps are essential components of jewelry, they must be placed correctly. If a designer designs a string so that it can be faxed, draw the correct number. of joints or loops with a certain distance. A piece of jewelry such as a bracelet, necklace, earrings, or other ornamental item required a proper closure system. These locks may contain some designs on top. If you want to pin a brooch to a dress, the best way is to fasten it with a pin that can be pinned or fastened with a brooch. There are different types of variants to this version to prevent the needle from coming out of the brooches. If you want to attach an earring to an earlobe, a threaded hinge is used as a stop. The “U” clip is the easiest way to wear an earring with pierced ears and is the best use for both aesthetic reasons and good balance. Some of the most commonly used clasps are the side hinge clasp, barrel clasp, box clasp, spring loaded clasp, and spring ring clasp.

Customer budget:
Jewelry has no value limit, but if the customer orders it for a certain amount, then we have to design our product, but taking this limit into account. Just imagine a customer requires a piece for fifty thousand rupees, that piece must be fifty thousand after collecting our profit. We must be concerned with benefit and cost. If the piece of jewelry costs fifty thousand, then it is very difficult to convince them why the price is out of budget. Therefore, it must be very clear that the price of the requested part must not exceed the budget of the client.

Certification:
A designer should know about the certification of jewelry and gemstones. The hallmark of gold, gemstone and diamond purity certification will build your trust and a lasting relationship with your client. It is a guarantee of authenticity and quality. So if you are a designer and a maker, get your jewelry certified.

Packaging:
If we are designing a beautiful piece of jewelry and having it manufactured, we should also think about a designer jewelry box for it. It will show a designer’s full sense of design. Many designers don’t realize the importance of packaging their jewelry the right way. The right jewelry box will enhance the look of the jewelry and will also help keep the piece of jewelry safe. The designer can print your specific brand on it. It will create a good image, but keep in mind that the package design matches your product range.

Jewelry is different than clothing or appliances. The value of jewelry does not depreciate and therefore your piece of jewelry should be durable and stay the same for much longer. Proper planning before designing and making any piece of jewelry will make your job easier and save you time and money.